1.Equipment Overview

This machine is used for spot welding of built-in negative electrodes of battery metal materials (Ni-MH, Ni-Cd batteries).

2.Operation Procedure

1. Set the equipment parameters according to the product process

2. Manually position the battery cell

3. Start the switch

4. The cylinder presses down for welding

5. After welding is completed, the cylinder rises

6. Manually remove the battery cell

3.Technical Parameters

4.Equipment Features

1. It adopts precise digital control, can preset 10 programs, and can be changed and called at will.

2. The use of double pulses can ensure that the welding is firm and the welding point is beautiful.

3. 7-segment LED display of various welding parameters.

4. The electrode is adjusted by polar coordinates, so that the upper and lower electrodes can be easily aligned and the welding space can be adjusted within a certain range, so that the operator can easily weld batteries of various shapes and sizes.

5. It is suitable for long-stroke welding (the maximum can reach 85mm, at this time the upper welding arm adapter is facing up), so it can realize the welding of built-in negative electrodes of batteries and other forms of long-stroke welding.

6. Automatically monitor and track compensation for mains voltage.

7. High power, simple operation, reliable welding.

5.Main Components and Brands

6.Installation Environment Requirements

1. Power supply: AC220V/50Hz, power about 1KW.

2. Compressed air: 0.5–0.7Mpa.

3. Equipment specifications:

1. Equipment weight: approximately 54kg.

2. Dimensions: approximately L (0.5m) x W (0.5m) x H (0.4m).

3. Appearance color: light gray.

4. Environmental requirements:

1. Ambient temperature: 25±5℃.

2. Relative humidity: 30%–75%RCH, the site air should be dry and unobstructed, and there should be no acid and alkali corrosion.

3. Grounding: protective grounding.